Tungsten Carbide Products with Injection Molding Process
The tungsten carbide products with injection molding process are available to make very complicated profile parts ,such as very thin wall sleeve, very small diameter drawing dies and fishing sinkers etc.The tungsten carbide products could be produced with injection molding technology as following:
1) Rotating Nozzle with Multiple Holes
Tungsten carbide grade: K20,K30
Function:To be used as nozzle for fluid and powder in chemical industry
Remark:it is available to produce various hole-diameter nozzle with 6~8 holes
2) Sand-Blasting Nozzle
Tungsten carbide grade:K20,K30
Function:To be used as nozzle to clean rusting in ship manufacturing industry .
Remark:The length for the nozzle reaches 150MM
3) Sleeve With Thin Wall
Tungsten carbide grade:K10,K20,K30
Function:To be used as wear-resistance parts in machinery
Remark:If the length under 100mm ,its wall as thin as 0.8mm,meanwhile its wall tube
with variety of sizes hole and grooves as necessary
4) Cutting Die-Core for Spring Wire
Tungsten carbide grade:K50
Function:To be used in the rolling and cutting machine for different diameter spring
wire
Remark:This kind of products are produced with series ,the minimum diameter is
capable to be controlled within 0.4mm ,length under 100mm
5) Rotary Carving Knife
Tungsten carbide grade:K10,K20,K30
Function:To be used as special tool in shoe-manufacturing
Remark:The thickness for the knife wall could be controlled within 2.5mm
6) Tungsten Carbide Burrs
Tungsten carbide grade:K20,K30
Function: To be used in the burr-grinding machine in hardware tools industry
Remark: Various profile and specification are available
7) Drawing Lock-Sleeve
Function:To be used as the drawing clamping tool in processing of metal wires
Remark:It is available to produce 2-piece/set,3-piece/set and 4-piece/set etc specification
8) Tungsten Carbide Bearing Bushing
Grade:K20,K30
Function:To be used as wear-resistance parts in harvester
Remark:It is available to produce 2-piece/set ,3-piece/set tungsten carbide bearing bushing,it wall
thickness could be controller within 2.0mm
9) Tungsten Carbide Cutting Disc
Function:to be used as cutting disc for metals
Remark:Its thickness is available to be controller within 0.5mm
10) Tungsten Carbide Micro-diameter Drawing Dies
Tungsten carbide grade:K20,K30
Function:To be used as drawing dies for various metals
Remark:It is available to make drawing dies with diameter at
0.12mm,0.15mm,0.18mm,0.20mm,0.23mm,0.25mm,0.28mm,0.30mm
11) Tungsten Fishing Sinker
Tungsten grade:93WNiFe,95WNiFe,97WNiFe
Function:To be used as fishing sinker in the fishing net
Remark:It is available to produce different size ,weight fishing sinkers as per your requirements .
